AnasayfaEnsturmanlarStudyomuzZiyaretci Defteriİletisim

  • mixer : Behringer DDX 3216 Digital Mixer

  • 32 full-fledged channels/12 ULN (Ultra Low-Noise) mic preamps

  • 16 busses, 8 aux sends, and comprehensive routing options
  • Fully featured dynamic and snapshot automation
  • 17 ultra-precise, low-noise 100mm motorized ALPS® faders
  • Compressor/limiter plus gate, 4-band parametric EQ, sweepable high-pass and phase reverse on all 32 channels, additional delay on channels 1-16
  • 4 simultaneously operable effects processors with dozens of first-class algorithms, accessible from all 32 channels
  • Additional compressor/limiter (switchable pre/post) and EQ for stereo main mix
  • 2 option slots, 3 power-packed options for unlimited connectivity (16-channel ADAT, 16-channel TDIF, 8-channel AES/EBU)
  • Analog feel, intuitive user interface
  • Dimensions (H * W * D) approx. 6 ½" x 17 ¼" x 22 ½"
    (163 mm x 438 mm x 572 mm)
  • Weight (net) approx. 29 ¾" lbs (13.5 kg)
mikrofonlar : Shure SM 58
                                                                                                        Behringer

gitar amfileri

Marshall JCM 601 1X12 Combo
Tamamen tüplü tasarım
4 tane ECC83 (12AX7) pre-amp ve 2 tane EL34 çıkış tüpü.
İki bağımsız kanal: Clean ve Overdrive
Her kanalın kendine ait bas, tiz, mid ve reverb kontrolleri.
Arka panelde Master Presence kontrolü.
Paralel loop miktarı ön panelden kontrol edilebilen seri ve paralel efekt loop'u
Marshall hoparlör simülatörlü XLR D.I. çıkışı
12 inç Marshall Celestion 'Heritage' hoparlör
557 x 447 x 258 mm ebadında 24 kg ağırlığında bir malzeme

Marshall Valvestate 2000   

  • 100W tube power

  • 4 EL34 power tubes

  • 4 ECC83 preamp tubes

  • 2 - 12" speakers: a Marshall Celestion and a Heritage

  • 3 channels

  • Spring reverb

  • Tone Shift switches on Crunch and Lead channels

  • Mid Boost switch on the Clean Channel

  • 2 parallel effects loops

  • Dual reverb controls

  • 2 Deep switches

  • 5-way LED footswitch

  • VPR (Virtual Power Reduction) switch emulates

  •  a fully saturated 25W amp

  • Marshall's acclaimed Speaker Emulation

  • Power Amp Mute button for silent recording

 

 

         

Marshall B150 (B-150) - 150W Bass Amplifier / Amp / Vombo

Using specially designed circuitry to accurately emulate the performance and dynamics of all-valve bass rigs, Marshall proudly present a revolutionary new concept in affordable bass amplification - Bass-State. Bass-State technology successfully delivers the fat, smooth, rounded bottom end and strong, vibrant treble normally only associated with valve amplification, while offering all the size, weight and cost advantages of solid-state technology.

The powerful B150 possesses several of the features that were found in our critically acclaimed Dynamic Bass System (DBS) - such as blendable valve and solid-state preamp stages, strong and effective primary rotary EQ network with a 7-band Graphic EQ, allowing detailed fine tuning of your tone.

The Blend control on the B150's incredibly versatile preamp stage allows you to select a myriad of different options from the percussive immediacy of a totally solid-state circuit, to the extra warmth and softer feel of a valve driven (1x ECC83) path, and anywhere in-between.

The amp's Bass and Treble rotary EQ is enhanced by extra Deep and Bright switches which, when combined with the amp's 7-band Graphic EQ section, adds further to the incredible tonal flexibility on offer. The B150 also boasts 'Soft Knee' Compression, our unique SLS Limiter technology and a series FX Loop.

Last, but certainly not least, an XLR DI Output with an Earth (Ground) Lift switch completes the specification of this impressive, 1x15" combo.
 

AnasayfaEnsturmanlarStudyomuzZiyaretci Defteriİletisim

 
Free Web Hosting